Overview
The Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) training expands your knowledge and skills of service provider core networks. You will gain the theoretical and practical knowledge needed to implement and operate service provider networks using technologies such as core architecture, services, networking, automation, quality of service (QoS), security, and network assurance.
This training prepares you for the 350-501 SPCOR v1.0 exam. If passed, you earn the Cisco Certified Specialist – Service Provider Core certification and satisfy the core exam requirement for the Cisco Certified Network Professional (CCNP) Service Provider and Cisco Certified Internetwork Expert (CCIE) Service Provider certifications. This training also earns you 64 Continuing Education (CE) credits towards recertification. How You'll Benefit
This training will help you:
- Configure, verify, troubleshoot, and optimize next-generation, service provider internet protocol (IP) network infrastructures
- Deepen your understanding of service provider technologies, including core architecture, services, networking, automation, quality of services, security, and network assurance
- Prepare for the 350-501 SPCOR v1.0 exam
- Earn 64 CE credits towards recertification
What to Expect in the Exam
Implementing and Operating Cisco Service Provider Network Core Technologies (350-501 SPCOR) v1.0 is a 120-minute exam associated with the Cisco Certified Specialist – Service Provider Core certification and satisfies the core exam requirement for the CCNP Service Provider and CCIE Service Provider certifications.
This exam tests your knowledge of core service provider network technologies, including:
- Core architecture
- Services
- Networking
- Automation
- Quality of services
- Security
- Network assurance
Prerequisites
There are no prerequisites for this training. However, the knowledge and skills you are recommended to have before attending this training are:
- Intermediate knowledge of Cisco IOS or IOS XE
- Familiarity with Cisco IOS or IOS XE and Cisco IOS XR software configuration
- Knowledge of IPv4 and IPv6 transmission control protocol (TCP)/IP networking
- Intermediate knowledge of IP routing protocols
- Understanding of MPLS technologies
- Familiarity with VPN technologies
These skills can be found in the following Cisco Learning Offerings:
- Implementing and Administering Cisco Solutions (CCNA)
- Understanding Cisco Service Provider Network Foundations (SPFNDU)
Delegates will learn how to
- Describe the service provider network architectures, concepts, and transport technologies
- Describe the Cisco IOS software architectures, main internetwork operating system (IOS) types, and their differences
- Implement open shortest path first (OSPF) in the service provider network
- Implement integrated intermediate system to intermediate system (IS-IS) in the service provider network
- Implement border gateway protocol (BGP) routing in service provider environments
- Implement route maps and routing policy language
- Describe IPv6 transition mechanisms used in the service provider networks
- Implement high availability mechanisms in Cisco IOS XR software
- Implement traffic engineering in modern service provider networks for optimal resource utilization
- Describe segment routing and segment routing traffic engineering concepts
- Describe the virtual private network (VPN) technologies used in the service provider environment
- Configure and verify multi-protocol label switching (MPLS) L2VPN in service provider environments
- Configure and verify MPLS L3VPN in service provider environments
- Implement IP multicast services
- Describe the QoS architecture and QoS benefits for service provider networks
- Implement QoS in service provider environment
- Implement control plane security in Cisco devices
- Implement management plane security in Cisco devices
- Implement data plane security in Cisco devices
- Describe the YANG data modeling language
- Implement automation and assurance tools and protocols
- Describe the role of Cisco Network Services Orchestrator (NSO) in service provider environments
- Implement virtualization technologies in service provider environment
Outline
- Describing Service Provider Network Architectures
- Describing Cisco IOS Software Architectures
- Implementing OSPF for Cisco IOS XR
- Implementing IS-IS for Cisco IOS XR
- Implementing BGP in Service Provider Network
- Implementing Route Maps and RPL
- Transitioning to IPv6 for Cisco IOS XR and IOS XE
- Implementing High Availability in Networking
- Implementing MPLS for Cisco IOS XR
- Implementing Cisco MPLS Traffic Engineering
- Describing Segment Routing
- Describing VPN Services
- Configuring L2VPN Services
- Configuring L3VPN Services
- Implementing Multicast for Cisco IOS XR
- Describing QoS Architecture
- Implementing QoS for Cisco IOS XR
- Implementing Control Plane Security
- Implementing Management Plane Security
- Implementing Data Plane Security
- Introducing Network Programmability
- Implementing Automation and Assurance
- Introducing Cisco NSO
- Implementing Virtualization in Service Provider Environment
Frequently asked questions
How can I create an account on myQA.com?
There are a number of ways to create an account. If you are a self-funder, simply select the "Create account" option on the login page.
If you have been booked onto a course by your company, you will receive a confirmation email. From this email, select "Sign into myQA" and you will be taken to the "Create account" page. Complete all of the details and select "Create account".
If you have the booking number you can also go here and select the "I have a booking number" option. Enter the booking reference and your surname. If the details match, you will be taken to the "Create account" page from where you can enter your details and confirm your account.
Find more answers to frequently asked questions in our FAQs: Bookings & Cancellations page.
How do QA’s virtual classroom courses work?
Our virtual classroom courses allow you to access award-winning classroom training, without leaving your home or office. Our learning professionals are specially trained on how to interact with remote attendees and our remote labs ensure all participants can take part in hands-on exercises wherever they are.
We use the WebEx video conferencing platform by Cisco. Before you book, check that you meet the WebEx system requirements and run a test meeting to ensure the software is compatible with your firewall settings. If it doesn’t work, try adjusting your settings or contact your IT department about permitting the website.
How do QA’s online courses work?
QA online courses, also commonly known as distance learning courses or elearning courses, take the form of interactive software designed for individual learning, but you will also have access to full support from our subject-matter experts for the duration of your course. When you book a QA online learning course you will receive immediate access to it through our e-learning platform and you can start to learn straight away, from any compatible device. Access to the online learning platform is valid for one year from the booking date.
All courses are built around case studies and presented in an engaging format, which includes storytelling elements, video, audio and humour. Every case study is supported by sample documents and a collection of Knowledge Nuggets that provide more in-depth detail on the wider processes.
When will I receive my joining instructions?
Joining instructions for QA courses are sent two weeks prior to the course start date, or immediately if the booking is confirmed within this timeframe. For course bookings made via QA but delivered by a third-party supplier, joining instructions are sent to attendees prior to the training course, but timescales vary depending on each supplier’s terms. Read more FAQs.
When will I receive my certificate?
Certificates of Achievement are issued at the end the course, either as a hard copy or via email. Read more here.