Overview
The Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) v1.0 course covers advanced call control and mobility services. You will learn how to use Cisco® Unified Communications Manager features to consolidate your communications infrastructure into a scalable, portable, and secure collaboration solution. Through a combination of lessons and hands-on experiences, you will also learn about a wealth of other features such as Globalized Call Routing, Global Dial Plan Replication, Cisco Unified Mobility, Cisco Extension Mobility, Device Mobility, Session Initiation Protocol Uniform Resource Identifier (SIP/ URI) call routing, Call Admission Control, Cisco Unified Communications Manager Express and Survivable Remote Site Telephony (SRST) gateway technologies, Cisco Unified Board Element Call deployments, signaling and media protocols, call coverage, and time of day routing.
This course prepares you for the 300-815 Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) exam.
This course will help you:
- Learn how to manage the tools of Cisco Unified Communications Manager (CM) for secure communication to facilitate team-based collaboration from any location using Voice over Internet Protocol (VoIP), video, unified messaging, and IM
- Gain hands-on experience in using Cisco Unified Communications Manager for secure, compliant communication protocols
- Acquire the knowledge to prepare for the 300-815 CLACCM exam which is not included in the course fee
Prerequisites
Before taking this course, you should have the following knowledge and skills:
- Internet web browser usability knowledge and general computer usage
- Basic understanding of networking technologies
- Basic understanding of voice and video
- Describe the different codecs and how they are used to transform analogue voice into digital streams
- Knowledge of Cisco Internetworking Operation System (Cisco IOS XE) command line
- Describe the Cisco Collaboration solutions architecture
- Define collaboration and describe the main purpose of key devices in a Cisco collaboration on-premises deployment model
- Configure and modify required parameters in Cisco Unified CM including service activation, enterprise parameters, CM groups, time settings, and device pool
- Deploy and troubleshoot IP phones via manual configuration within Cisco Unified CM
- Describe and configure endpoints and commonly required features
- Compare the IP Phone signaling protocols of Session Initiation Protocol (SIP), H.323, Media Gateway Control Protocol (MGCP), and Skinny Call Control Protocol (SCCP)
- Analyze traffic patterns and quality issues in converged IP networks supporting voice, video, and data traffic
- Define Quality of Service (QoS) and its models
- Describe the call setup and teardown process for a SIP device including codec negotiation using Session Description Protocol (SDP) and media channel setup
- Manage Cisco Unified CM user accounts (local and via Lightweight Directory Access Protocol [LDAP])
- Describe a dial plan and explain call routing in Cisco Unified Communications Manager
- Configure dial plan elements within a single site Cisco Unified CM deployment including Route Groups, Local Route Group, Route Lists, Route Patterns, Translation Patterns, Transformations, SIP Trunks, and SIP Route Patterns
- Implement basic globalized call routing within a Cisco Unified Communications Manager cluster
- Configure calling privileges in Cisco Unified Communications Manager
- Implement toll fraud prevention
- Implement common endpoint features including call park, softkeys, shared lines, and pickup groups
- Implement Public Switched Telephone Network (PSTN) access using Media Gateway Control Protocol (MGCP) gateways
- Implement a Cisco gateway for PSTN access
- Deploy a simple SIP dial plan on a Cisco Interrupt Service Routine (ISR) gateway to enable access to the PSTN network
- Implement and troubleshoot media resources in Cisco Unified Communications Manager
- Manage Cisco Unified CM access to media resources available within Cisco Unified CM and Cisco ISR gateways
- Describe tools for reporting and maintenance including Unified Reports, Real Time Monitoring Tool (RTMT), Distributed Resource Scheduler (DRS), and Call Detail Records (CDRs) within Cisco Unified CM
The following Cisco courses can help you gain the knowledge you need to prepare for this course:
- Understanding Cisco Collaboration Foundations (CLFNDU)
- Implementing and Operating Cisco Collaboration Core Technologies (CLCOR)
Who should attend
- Network administrator
- Network architect
- Network designer
- Network engineer
- Network manager
Delegates will learn how to
After taking this course, you should be able to:
- Analyze and troubleshoot SIP, H.323, and media protocols
- Implement time-of-day routing, call park, call pickup, and meet-me conferences in Cisco Unified Communications Manager
- Implement call coverage in Cisco Unified Communications Manager
- Configure and troubleshoot Cisco Unified Communications Manager Device Mobility
- Configure and troubleshoot Cisco Unified Communications Manager Extension Mobility
- Configure and troubleshoot Cisco Unified Communications Manager Unified Mobility
- Implement Cisco Unified Communications Manager Express for SIP phones
- Implement globalized call routing within and between Cisco Unified Communications Manager clusters
- Implement Media Gateway Control Protocol (MGCP) fallback and Survivable Remote Site Telephony (SRST) in Cisco Unified Communications Manager and in Cisco IOS® XE gateways
- Implement Call Admission Control and Automated Alternate Routing (AAR) in Cisco Unified Communications Manager
- Implement URI calling in Cisco Unified Communications Manager for calls within a cluster and between clusters
- Troubleshoot multisite Cisco Unified Communications Manager deployments
- Implement Intercluster Lookup Service (ILS) between Cisco Unified Communications Manager clusters and enable General Data Protection Regulation (GDPR)
- Configure and troubleshoot Cisco Unified Border Element
Outline
- Analyzing and Troubleshooting Signaling and Media Protocols
- Implementing Cisco Unified Communications Manager Supplemental Services
- Implementing Call Coverage in Cisco Unified Communications Manager
- Configuring and Troubleshooting Cisco Unified Communications Manager Device Mobility
- Configuring and Troubleshooting Cisco Unified Communications Manager Extension Mobility
- Configuring and Troubleshooting Cisco Unified CM Unified Mobility
- Implementing Cisco Unified Communications Manager Express
- Implementing Globalized Call Routing
- Implementing Remote Site Survivability
- Implementing Call Admission Control in Cisco Unified Communications Manager
- Implementing URI Calling in Cisco Unified Communications Manager
- Troubleshooting Multisite Cisco Unified Communications Manager Deployments
- Examining Global Dial Plan Replication
- Configuring and Troubleshooting Cisco Unified Border Element
Lab outline
- Analyze SIP, H.323, and Media Protocols
- Troubleshoot SIP and Media Protocols
- Implement Cisco Unified Communications Manager Supplemental Services
- Implement Call Hunting and Call Queueing in Cisco Unified Communications Manager
- Configure Device Mobility
- Troubleshoot Cisco Unified Communications Manager Device Mobility
- Configure Cisco Unified Communications Manager Extension Mobility
- Troubleshoot Cisco Unified Communications Manager Extension Mobility
- Configure Cisco Unified Mobility
- Troubleshoot Cisco Unified Mobility
- Implement Endpoints in Cisco Unified Communications Manager Express
- Implement Endpoint Addressing and Call Routing in Cisco Unified Communications Manager Express
- Implement Calling Privileges in Cisco Unified Communications Manager Express
- Implement Hunt Groups, Call Park, and Paging in Cisco United Communications Manager Express
- Implement Globalized Call Routing
- Implement TEHO, PSTN Backup, and CoS in a Globalized Call-Routing Deployment
- Implement MGCP Fallback and Survivable Remote Site Telephony
- Implement Call Admission Control
- Implement a URI-Based Dial Plan for Multisite Deployments
- Troubleshoot Globalized Call Routing
- Troubleshoot Call Admission Control
- Implement Global Dial Plan Replication
- Implement Cisco Unified Border Element
- Troubleshoot Cisco Unified Border Element
Frequently asked questions
How can I create an account on myQA.com?
There are a number of ways to create an account. If you are a self-funder, simply select the "Create account" option on the login page.
If you have been booked onto a course by your company, you will receive a confirmation email. From this email, select "Sign into myQA" and you will be taken to the "Create account" page. Complete all of the details and select "Create account".
If you have the booking number you can also go here and select the "I have a booking number" option. Enter the booking reference and your surname. If the details match, you will be taken to the "Create account" page from where you can enter your details and confirm your account.
Find more answers to frequently asked questions in our FAQs: Bookings & Cancellations page.
How do QA’s virtual classroom courses work?
Our virtual classroom courses allow you to access award-winning classroom training, without leaving your home or office. Our learning professionals are specially trained on how to interact with remote attendees and our remote labs ensure all participants can take part in hands-on exercises wherever they are.
We use the WebEx video conferencing platform by Cisco. Before you book, check that you meet the WebEx system requirements and run a test meeting (more details in the link below) to ensure the software is compatible with your firewall settings. If it doesn’t work, try adjusting your settings or contact your IT department about permitting the website.
How do QA’s online courses work?
QA online courses, also commonly known as distance learning courses or elearning courses, take the form of interactive software designed for individual learning, but you will also have access to full support from our subject-matter experts for the duration of your course. When you book a QA online learning course you will receive immediate access to it through our e-learning platform and you can start to learn straight away, from any compatible device. Access to the online learning platform is valid for one year from the booking date.
All courses are built around case studies and presented in an engaging format, which includes storytelling elements, video, audio and humour. Every case study is supported by sample documents and a collection of Knowledge Nuggets that provide more in-depth detail on the wider processes.
When will I receive my joining instructions?
Joining instructions for QA courses are sent two weeks prior to the course start date, or immediately if the booking is confirmed within this timeframe. For course bookings made via QA but delivered by a third-party supplier, joining instructions are sent to attendees prior to the training course, but timescales vary depending on each supplier’s terms. Read more FAQs.
When will I receive my certificate?
Certificates of Achievement are issued at the end the course, either as a hard copy or via email. Read more here.