Overview

When system problems occur companies often automatically send the dumps to IBM, without looking at them first. However, as we all know, z/OS today is almost invariably a multi-vendor software environment.<br>This course teaches you the vital (yet simple) techniques that will quickly glean maximum information from the diagnostic data. This lets you identify the vendor product responsible for the problem, and ultimately verify their diagnosis of the problem.<br><br>This course describes and explains what can go wrong in an IBM z Systems environment, and what you can do about it as an operator or systems programmer. It looks at failure situations from many points of view, including hardware problems and the software environment.<br><br>The software environment is further examined by looking at the Recovery Termination Manager (RTM) - the 'cleaning-up' function of z/OS - and its ABEND-concept. All the different reports that come out of a z/OS system in conjunction with failures (messages, dumps, traces, etc.) are also discussed. The most common reasons for system ABENDs (and how you can analyze the information coming out of the system when they occur) are also covered.<br><br>The course is also available for one-company, on-site presentations and for live presentation over the Internet, via the Virtual Classroom Environment service.
Read more +

Prerequisites

To benefit from this course, participants need both the ability to read Assembler code and familiarity with z/OS internal operations and data areas (including the concept of control block chaining). These prerequisites can be met by completing the RSM courses Using z/OS Assembler, z/OS System Fundamentals Part 1 and z/OS System Fundamentals Part 2.
Read more +

Delegates will learn how to

  • identify which software component caused the problem
  • identify the vendor responsible for the problem
  • glean the most relebvant diagnostic information in the minimum time
  • use the appropriate diagnostic procedure for each type of dump
  • identify the failing operating system component in standalone and SVC dumps
  • use various operating system data-gathering facilities such as system traces, LOGREC, and SLIP
  • locate information in various manuals that is critical to problem resolution.
  • develop a methodology to speedily extract the required information for resolving a problem situation.
Read more +

Outline

Interactive Problem Control System

Control block/data area; Information sources; Control block header; Control block data area map; Cross reference table; Fields and subfields; Field redefinitions; Control block chaining; Finding control blocks; The Prefix Area (PSA); The new Prefix Area (PSA); Dump types; IPCS introduction: what is IPCS?, What makes up IPCS?; Getting started with IPCS - Primary Option Menu; Default values selection; Primary Option Menu; Data entry panel; Pointer stack panel; Getting around in IPCS browse; IPCS subcommand entry panel; IPCS command output display; IPCS LIST command; Indirect addressing; Displaying Control Blocks; Creating SYMBOLS: Dump Directory; Additional Useful Commands; Dump analysis panel; Component Data Analysis Panel; STATUS; Analysis commands; Dump Management panel.

Recovery & Termination

MVS's recovery management; RMS; What does RTM do?; Interrupt types; Anatomy of an Interrupt; RTM - The Big Picture; How is RTM invoked?; Normal termination; Abnormal termination - problem types; Program check; Software 'Abend'; Abnormal termination - recovery; Recovery routines; RTM status information; ESPIE environment; ESPIE processing; ESTAE recovery routines; ESTAE environment; STAE Control Blocks (SCB); ESTAE processing; Percolation; Functional Recovery Routines; FRR environment; FRR stacks; RTM2WA; SDWA; Variable Recording Area; Interpreting the SDWA; Interpreting the Variable Recording Area; Logrec detail reports.

Request Block Analysis

Address space structures; RB loss of control; Linkage stacks; RB analysis procedure; Linkage Stack analysis; General analysis; RB analysis.

System Trace

Starting the System Trace; Formatting the Trace; Sequence of events; Interpreting Traces; System Trace tips.

SVC Dump Analysis Approach

Generating SVC dumps; Dump Analysis and Elimination; Types of SVC Dump; Problem resolution overview; Dump TITLE; SDWA; History; RTM2WA; Other dump types.

Multi Processor Environments

Tightly coupled processing; Prefixing; Processor coexistence; Processor STATUS; Work In Progress; Interrupt information.

Locks

The problem; An example of what can go wrong; Serialization via LOCKS; Lock varieties; Locking Hierarchy; Locking Mechanics (SPIN); Spin Loop Identification; Spin Lock Holder; Local/CML Locks; Locking Mechanics; Global Suspend Locks ANALYZE; Locks Held; Locking Mechanics (CPU LOCK); SPIN lock summary; SUSPEND lock summary; ANALYZE.

Dispatcher

What does it mean to be dispatched?; Where does the dispatcher run?; Dispatchable units of work; Who calls the Dispatcher?; Special exits; Service Request Block routines; Service Request Block (SRB); SRB example - IOS post; Service Request Block (SRB); Suspended Service Request Block (SSRB); SRB priorities; SRB scheduling with IEAMSCHD; SRB enclaves; Dispatcher queues; Scheduling service requests; Address spaces; ASCB/ASXB contents; Finding work within an address space - tasks; TCB contents; TCB chaining; Address space task structure; Serialization with Intersect; Dispatcher indicators; Global problem determination; Global indicators - SRB queues.

Address Space Control

Cross Memory Services; XMS instructions; PC & PT/PR; XMS authorisation; Primary, Secondary & Home modes; Access Register mode; SSAR; Access Register Translation (ART); Access lists; ALETs.

SAD Analysis Approach

Big picture; Dump environments; When should A SADUMP be taken?; Pre SADUMP considerations; Taking a Standalone Dump; Stand Alone Dump analysis path selection; Disabled Wait analysis path; Enabled Wait Analysis path; Enabled Running Analysis path; Disabled Running Analysis path.

Input/Output Supervisor

IOS drivers; Performing I/O; I/O flow; IOS analysis - high level; Active I/O analysis; IOS failure analysis.

Real Storage Manager

Types of storage; Dynamic Address Translation; Identifying The STD; Managing real storage; RSM high level check; Detailed analysis - high fixed page utilisation; Detailed analysis - other problems; History - Component Trace.

Auxiliary Storage Manager

Paging a frame to a slot; ASM high level check; Detailed analysis: what is the problem?, who is affected?

Read more +

Why choose QA

Dates & Locations

Need to know

Frequently asked questions

How can I create an account on myQA.com?

There are a number of ways to create an account. If you are a self-funder, simply select the "Create account" option on the login page.

If you have been booked onto a course by your company, you will receive a confirmation email. From this email, select "Sign into myQA" and you will be taken to the "Create account" page. Complete all of the details and select "Create account".

If you have the booking number you can also go here and select the "I have a booking number" option. Enter the booking reference and your surname. If the details match, you will be taken to the "Create account" page from where you can enter your details and confirm your account.

Find more answers to frequently asked questions in our FAQs: Bookings & Cancellations page.

How do QA’s virtual classroom courses work?

Our virtual classroom courses allow you to access award-winning classroom training, without leaving your home or office. Our learning professionals are specially trained on how to interact with remote attendees and our remote labs ensure all participants can take part in hands-on exercises wherever they are.

We use the WebEx video conferencing platform by Cisco. Before you book, check that you meet the WebEx system requirements and run a test meeting (more details in the link below) to ensure the software is compatible with your firewall settings. If it doesn’t work, try adjusting your settings or contact your IT department about permitting the website.

How do QA’s online courses work?

QA online courses, also commonly known as distance learning courses or elearning courses, take the form of interactive software designed for individual learning, but you will also have access to full support from our subject-matter experts for the duration of your course. When you book a QA online learning course you will receive immediate access to it through our e-learning platform and you can start to learn straight away, from any compatible device. Access to the online learning platform is valid for one year from the booking date.

All courses are built around case studies and presented in an engaging format, which includes storytelling elements, video, audio and humour. Every case study is supported by sample documents and a collection of Knowledge Nuggets that provide more in-depth detail on the wider processes.

When will I receive my joining instructions?

Joining instructions for QA courses are sent two weeks prior to the course start date, or immediately if the booking is confirmed within this timeframe. For course bookings made via QA but delivered by a third-party supplier, joining instructions are sent to attendees prior to the training course, but timescales vary depending on each supplier’s terms. Read more FAQs.

When will I receive my certificate?

Certificates of Achievement are issued at the end the course, either as a hard copy or via email. Read more here.

Let's talk

By submitting this form, you agree to QA processing your data in accordance with our Privacy Policy and Terms & Conditions. You can unsubscribe at any time by clicking the link in our emails or contacting us directly.